-------------------------------------------------------- Digital Camera Drivers and Utility Programs Version 3.0S -------------------------------------------------------- This CD contains the drivers, utility programs and bundled software for the camera. System Requirements: - Pentium class 166MHz or faster processor - 32MB memory - USB port - 16-bit (or higher) color display - CD-ROM drive for software installation - 300MB free hard disk space - Windows 98/ME or Windows 2000/XP or Mactinosh 9.0 or higher This camera requires Windows with USB support. Windows 95 and Windows NT are not supported. ------------------------------------- 1.0 Starting the Installation Program ------------------------------------- Note: Please run the installation program before connecting the camera to the computer. If you connect the camera to the computer before the drivers are installed, an Add New Hardware Wizard dialog box will appear and prompt you for the device driver. Please select Cancel to exit. The installation program starts automatically when you insert the CD. To start the installation program manually, click the Start button then click Run. Enter: d:\setup where d: is the drive letter of your CD-ROM drive. Click the OK button. Follow the on-screen instruction to complete the installation. Installation of other bundled software is optional. ---------------------- 2.0 Installing Drivers ---------------------- After completed the install driver procedure as described in Section 1.0, you shall connect the camera to your computer to install drivers. 1. Connect the camera to the USB port of your computer. 2. You may be prompted for the Windows CD, please have it available. 3. If the camera being installed has a microphone option, an 'Add New Hardware Wizard' will guide you through the installation of this portion of the device. 4. The rest of the installation will complete automatically. Installation of other bundled software is optional. ----------------------------- 3.0 Uninstalling the Drivers ----------------------------- There are two tasks that need to be done to uninstall the drivers of the camera. A. Removing the camera through the Device Manager 1. Connect the camera to the computer. 2. Click the Start button, point to Settings, and click Control Panel. 3. Double-click System and click on the Device Manager tab. 4. Select 'DF series Still Camera Device' and 'DF series Video Camera Device' from the Imaging Device. - In Windows 98/Me, click the Remove button and follow the on-screen instructions. - In Windows 2000/XP, right-click and select Uninstall, then follow the on-screen instructions. 5. Close the Device Manager. 6. Unplug the camera and restart your computer. B. Removing the driver software 1. Click the Start button, point to Programs, and click 'DF series Digital Camera/Uninstall'. 2. Follow the on-screen instructions to complete the uninstall. You have completely removed the drivers software and associated registry entries. The next time the device is plugged in to the computer it will require a reinstallation. End of file